Any other use is not recommended and will void the warranty. This thermostat should only be used as described in this manual.This thermostat also requires two (2) properly installed “AA” alkaline batteries to retain clock setting in the event of loss of AC Power due to a power outage or rolling blackouts when used as a hardwired thermostat.Refer to “Low Battery Detection and Replacement” section for more information. This thermostat is a dual power thermostat and either requires 24 Volts AC Power or two (2) properly installed “AA” alkaline batteries for normal operation and control of the heating or cooling system.Always turn off power to the air conditioning or heating system prior to installing, removing, cleaning or servicing thermostat.Specifications Installation Testing Your New Thermostat Programming User Settings Temperature Adjustmentįeatures 7 Battery Replacement 8 Troubleshooting 9 Wiring Diagrams All trademarks are the property of their respective owners.PSTS21P52 Multi-Stage 2 Heat / 1 Cool Conventional and Heat Pumpīefore Installing, Programming or Operating, PLEASE READ ALL INSTRUCTIONS 1 2 3 4 5 *Verify specific application requirements. Operating Humidity: 5% to 95% Relative Humidity.Heat pump systems 250mv – 750mv millivolt heating systems Compatibility: Gas, oil or electric systems.DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included).4 amp total maximum load (all terminals).3 amp total maximum load (all terminals).Electric Rating: 24 Volt AC (18-30 Volt AC).The thermostat can be mounted to a horizontal junction box. The thermostat shall have low battery indication and a front reset button will return all user and program settings to default values when pressed. The thermostat shall include non-volatile memory to retain user settings, adjustable temperature limits, filter check monitor, adaptive recovery mode (ARM™), and separate heating and cooling set point program times and temperatures. 5° C), and humidity range between 5% and 95% relative humidity. Temperature control range shall be between 45° and 90° F (7° and 32° C), the accuracy of +/- 1° F (+/. The thermostat shall have a bright blue backlight display and a separate sub-base for trouble-free installation. The thermostat shall be compatible with single-stage gas, oil, or electric heating or cooling systems including single-stage heat pumps and 250mv – 750mv millivolt heating systems. The digital programmable thermostats shall be PROSELECT® model numbers PSTSL11P52 and PSTSL21P52, 3.62” high x 4.72” wide x 1.38” deep, powered independently with either 24 Volt AC or with two “AA” alkaline batteries (3.0 Volt DC).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |